Li-Cube Power10 Solar-Ready Container System Base
The Li-Cube Power10 Solar-Ready System is a Canadian-engineered, containerized micro-power solution designed for commercial, industrial, and off-grid environments. This configuration integrates a 6,000 W solar array using ten (10) Elios 600 W bifacial solar panels, distributed across multiple orientations to achieve maximum year-round production.
Every Power10 is sized to your loads, storage needs and site conditions. Book a consultation and our engineers design the system with you.
Optimized solar placement
Ten panels. Four orientations. Zero wasted daylight.
East
Morning capture
3 wall panels bring the system online at first light.
South · Roof
Peak production
2 adjustable panels, 0–45° tilt, for maximum midday yield.
South · Wall
Winter optimized
2 wall panels tuned for low winter sun angles.
West
Evening extension
3 wall panels keep producing into the evening.
Engineering deep dive
What's actually inside the box.
6,000 W Bifacial Solar Array
Ten Elios 600 W monocrystalline bifacial modules generate dependable power by capturing sunlight on both faces — direct light in front, reflected light behind. Engineered to deliver consistent output in every Canadian climate, from harsh winters to hot summers.
Victron Monitoring & Conversion
Power management runs on Victron SmartSolar MPPT charge controllers with a Cerbo GX and GX Touch display. On-site, your crew sees production and storage at a glance. Off-site, VRM remote monitoring gives your operations team the same visibility from anywhere in the world.
Insulated, Secure Enclosure
Every component lives inside a heavy-gauge steel container with four-inch polyurethane walls rated R-26, a powder-coated exterior, weather-sealed cable ports and a commercial-grade locking door. Weather, impact and theft are engineered out of the equation.
Deployment-Ready Package
The Power10 arrives fully pre-wired and factory-tested. Commissioning happens in hours, not weeks — making it ideal for hybrid integrations and remote sites where every crew-day on location costs real money.
Technical specifications
The numbers your engineer will ask for.
What's included
One delivery. Nothing left to source.
Integrated & factory-tested- 10 × Elios 600 W bifacial panels
- South / east / west wall racks
- PV harnesses & connectors
- Adjustable aluminum roof rack
- Mounting hardware & fasteners
- DC protection & surge
- SmartSolar MPPT controller(s)
- GX Touch on-site display
- Cerbo GX system controller
- VRM remote monitoring
- Pre-wired solar compartment
- Weather-sealed conduit ports
- R-26 insulation & locking door
- Full docs + QC test report
The business case
It pays for itself, then it pays you.
Annual operating cost
Diesel fuel and maintenance alone run about $76,650 a year at 24/7 operation. A 20 kW propane backup cuts that to $2,870/yr; an 11 kW diesel backup lands at $4,532/yr if diesel-only site logistics are preferred.
5-year cost of ownership
Figures reconciled from Volts Energies' Li-Cube Power backup generator comparison (2-trailer, 28-panel, 80 kWh battery jobsite scenario) against a 20 kW diesel generator running 24/7. Fuel + routine maintenance only; excludes generator rental/capital cost. Actual savings depend on your loads, climate, fuel price and configuration.
Where the Power10 works
Deployed where the grid gives up.
Common questions
Before you book the call.
How is the final price determined?+
How long does deployment actually take?+
Will it survive our winters?+
Can it integrate with our existing generator?+
How do we monitor it remotely?+
What support comes after delivery?+
Book a consultation
Tell us about your site. We'll design the system.
Share your site and loads, and our engineering team comes back within two business days with a recommended configuration, budget and delivery timeline.
