Request a Quote

Optimized solar placement

Three panels. Three orientations. Continuous coverage.

The Security unit's three panels sit on independently adjustable galvanized mounts, each angled to its own compass direction, so the system keeps collecting light through the full arc of the day.
Three panels. Three orientations. Continuous coverage.
1,800 W · Bifacial · 30° adjustable mounts

East

Morning capture

1 panel on a 30° adjustable galvanized mount captures first light.

South · Roof

Peak production

1 panel angled for maximum midday yield.

South · Wall

Evening extension

1 panel keeps producing into the evening.

1,800W
Bifacial solar array
+30%
Rear-side bifacial gain
R-13
2" polyurethane insulation
30°
Adjustable mount angle

Engineering deep dive

What's actually inside the box.

01 / GENERATION

1,800 W Bifacial Solar Array

Three Elios 600 W bifacial modules on adjustable galvanized steel mounts deliver efficient, high-density generation, with rear-side solar gain boosting harvest by up to 30% under reflective conditions.

+30% additional rear-side production from bifacial capture
1,800 W Bifacial Solar Array
02 / CONTROL

Victron Power Management

Victron power management keeps the system operating efficiently and intelligently, using SmartSolar MPPT controllers to optimize charging and solar harvest as conditions change. Cerbo GX with GX Touch provides on-site viewing; VRM connectivity enables remote monitoring and alerts.

24/7 remote system oversight through Victron VRM
Victron Power Management
03 / PROTECTION

Dual-Security Door System

The dual-security door system adds layered protection without sacrificing airflow, combining a commercial-grade locking steel exterior door with an interior metal wire-mesh door that shields equipment while allowing ventilation.

2-layer physical security layers protecting equipment
Dual-Security Door System
04 / PROTECTION

Insulated, Weather-Protected Enclosure

The enclosure is designed to stay insulated and weather-protected in tough environments, with 2-inch polyurethane walls rated at R-13 to help moderate interior temperatures. Powder-coated steel resists corrosion; weather-sealed conduit entries keep cable routing clean.

R-13 insulation moderates interior temperatures
Insulated, Weather-Protected Enclosure

Technical specifications

The numbers your engineer will ask for.

Solar Array
Total capacity1,800 W
Panel typeElios 600 W mono bifacial
Panel count3
South wall1 panel (30° adjustable)
East wall1 panel (30° adjustable)
West wall1 panel (30° adjustable)
Bifacial gainUp to 30%
Racking
MaterialGalvanized steel
Side racks3× adjustable 30° (E/W/S)
Snow & wind ratingEngineered to Canadian code
Power Conversion & Monitoring
Charge controllersVictron SmartSolar MPPT
On-site displayGX Touch
DC protectionBreakers, fuses, disconnects, surge
System controlVictron Cerbo GX
Remote monitoringVictron VRM
Enclosure
StructureHeavy-gauge steel container
DoorCommercial-grade locking steel door + interior wire mesh security door
Cable entriesWeather-sealed AC/DC ports
Insulation2" polyurethane · R-13
FinishPowder-coated exterior
Installation typeFixed / semi-permanent
Best for
Best forSurveillance, telecom, lighting, remote monitoring
Need the full engineering package?
We'll walk you through the complete spec sheet, drawings and configuration options on a call.
Book a Consultation

WHAT'S INCLUDED

Everything you need, factory-installed.

No separate parts list to chase down. The Security unit ships pre-wired and factory-tested, from the panels and mounts down to the monitoring display.
Everything you need, factory-installed.INTEGRATED & FACTORY-TESTED
Solar / power generation components
  • 3 × Elios 600 W bifacial panels
  • 3 × 30° galvanized adjustable ground mounts
  • PV wiring & connectors
  • Galvanized fasteners & hardware
  • DC protection suite (breakers, fuses, disconnects, surge suppressor)
Power conversion & monitoring equipment
  • Victron SmartSolar MPPT controller(s)
  • Victron Cerbo GX
  • Victron GX Touch Display
  • DC distribution block
  • Victron Energy 3,000W Inverter/Charger (per official spec sheet)
  • 9,600 Wh to 39,000 Wh battery bank (4 to 16 batteries), configuration-dependent (per official spec sheet)
  • Integrated into the Victron 3,000W Inverter/Charger
  • All wiring & labeling
Enclosure / container integration
  • Pre-wired solar electrical system
  • 2-inch polyurethane insulation (R-13)
  • Weather-sealed conduit ports
  • Documentation package

The business case

It pays for itself, then it pays you.

Against a 6 kW diesel light tower, the Li-Cube Security Hybrid cuts annual operating cost by up to 89%.
85.3%–88.7%
Lower annual operating cost vs diesel
$18,471–$24,858
Saved per year (CAD, internal vs external diesel maintenance)
~7,740 L
Diesel eliminated per year

Annual operating cost

Diesel light tower (6 kW) - internal maintenance$21.6K – $28.0K / yr
 
Li-Cube Security Hybrid$3.2K / yr
 

Diesel light tower maintenance is quoted two ways: performed in-house it runs about $21,643/yr, or about $28,030/yr if serviced externally. Either way, the Li-Cube Security Hybrid's solar + propane backup cuts that to about $3,172/yr.

5-year cost of ownership

Illustrative, diesel cost climbs with every operating hour; Li-Cube stays low.
High$0 Yr 0Yr 2Yr 5
Li-Cube Security HybridDiesel light tower (6 kW) - internal maintenanceDiesel (alternate)

Figures from the Li-Cube Security Hybrid vs Diesel Light Tower comparison (2.5 kW ONAN propane backup + 1.8 kWp solar vs a 6 kW diesel light tower running ~4,300 h/yr). Includes fuel and maintenance; diesel figures shown for both in-house and externally-serviced maintenance. Actual savings depend on your site's operating hours, fuel price and maintenance arrangement.

USE CASES

Built to protect the sites that can't go dark.

From perimeter monitoring to unattended remote sites, the Security unit keeps power, lighting, and surveillance running where staff can't always be present.
Temporary security, lighting, and camera power for active construction sitesPerimeter security and surveillance for exploration and drill sitesTelecom site security & power backupEquipment yard and livestock area surveillanceRemote facility/community surveillanceRetrofit for existing diesel light towers needing a hybrid, lower-fuel optionOther / custom configuration

Common questions

Before you book the call.

What is the Security unit designed to power?+
It's built to run surveillance cameras, telecom equipment, lighting and remote monitoring systems in locations without reliable grid access.
How is the equipment protected against tampering or theft?+
A dual-security door system combines a commercial-grade locking steel exterior door with an interior metal wire-mesh door, so equipment stays shielded and ventilated even when the outer door is open for servicing.
Will the mounts and enclosure hold up outdoors year-round?+
Yes. The three solar panels sit on adjustable galvanized steel mounts engineered for Canadian wind and snow loads, and the enclosure is insulated with 2-inch, R-13 polyurethane walls.
How long does delivery take?+
Units ship 5–8 weeks after order placement.
What support is included after delivery?+
The Security unit includes 365 days of dedicated post-delivery support, longer than the standard 30-day window on the Power series, reflecting its use in unattended, remote deployments.
Can we monitor it remotely?+
Yes, through Victron VRM, with on-site viewing and settings adjustment via the Cerbo GX and GX Touch display.

Book a consultation

Tell us about your site. We'll design the system.

Share your site and loads, and our engineering team comes back within two business days with a recommended configuration, budget and delivery timeline.

Direct access to the engineering team, not a sales script
A recommended configuration built around your actual loads
Full spec sheet and drawings walked through on the call

Book a Li-Cube Security with 1800W of Solar Panels

Takes about a minute. No obligation.

We respond within two business days. Your information is never shared.